At first these gauges are a simple 9000rpm tachometer gauge, they can also double as a programable shift light.
First is the warning setting, this is where the shift light function will end and the gauge beeps to say you have hit redline.
The second setting is the RPM step setting which determines at what RPM will the shift light feature starts it’s process of changing the gauges colour right up to your set warning figure.
Below we have two examples of how this shift light function works, note for both these examples we have the operating colour of the gauge as blue, and we have set the four selectable colours for the shift light function to Green, Yellow, Orange & Red. Note that it’s also possible to change any of these 4 shift light colours on the gauge to any combination you like. So for example you want to use Red as your normal running colour for the tacho, you could have the shift light function go from Red when operating outside of the RPM range that triggers the shift light staging, then when it enters the RPM ranges for the shift light function it will start changing to Green, Yellow, Orange, White for example. You have complete control over which colours you want to use as the base operating colour, and then which colours are used in the shift light staging.
So below we have two examples of what the results are from setting the RPM Step function at 500 or 200, along with the RPM redline / warning at 6500 & 7000 RPM, these examples show how the gauge will respond with the shift light function turned on, along with both of these settings configured.
Tachometer + Shift Light Example #1
RPM Step Setting: 500rpm
RPM Warning: 6500
0-4500 RPM = Gauge Is Blue
4501-5000 RPM = Gauge Is Green
5001-5500 RPM = Gauge Is Yellow
5501 – 6000 RPM = Gauge Is Orange
6001 – 6500 RPM = Gauge Is Red
6500 RPM = Audible Beeping From the Gauge
Tachometer + Shift Light Example #2
RPM Step Setting: 200rpm
RPM Warning: 7000
0-6200 RPM = Gauge Is Blue
6201-6400 RPM = Gauge Is Green
6401-6600 RPM = Gauge Is Yellow
6601 – 6800 RPM = Gauge Is Orange
6801 – 7000 RPM = Gauge Is Red
7000 RPM = Audible Beeping From the Gauge
Tacho Readout 0 to 9000 RPM
Configurable Shift Light
Redline Warning
Peak Value Recoding
10-Colour Selectable LCD
3 Selectable opening & Closing Ceremonies
Three Volts Scale Type Selections
Day & Night Brightness Settings
What's in the box
52mm Edge Digital Tachometer Gauge
52mm Gauge Pod
U-Bracket Pillar Mounting Kit
1M Wideband Input Cable
1M Remote Button Controller
1.5M Power Cable
20cm Power Link Cable
